烤漆房的基本配置結構原理

2017-10-13  來自: 濟南AJ棋牌環保設備有限公司 瀏覽次數:659

1、無塵打磨房.打磨房可滿足不同車型修理車間的使用需要,主要的功能是為了從維修車間移除灰塵、廢氣,確保工作環境的清新,提高維修質量,保障生產人員的健康.

1, clean grinding room. Real grinding can meet the use of different models to the repair shop, the main function is to remove dust and gas from the maintenance workshop, ensure the working environment clean, improve maintenance quality, ensure the production personnel's health.

2、烘幹設備:有水份烘幹、熱膠固化塗膜幹燥等烘幹設備.熱源采用電、油、蒸氣等,配用高質量的儀表控製,使得烤漆房內部均勻,升溫速度快.

2, drying equipment: moisture drying, heat curing coating drying and other drying equipment. The electric heat, oil, steam, instrument control with high quality, make the paint room internal uniform heating speed.

3、噴漆設備:分為:水旋、水簾、油簾、無泵噴漆室,幹式烤漆房為國內外技術和國內多年施工經驗的結晶,它適用於機械行業各種大小批量的底麵漆噴塗需要.

3, spray equipment: divided into: water rotation, water curtain, curtain, no oil pump spray chamber, crystal dry paint room for the domestic and foreign advanced technology and many years of construction experience, it is suitable for all kinds of machinery industry size quantities of bottom paint spraying.

4、防壓裝置: 能保證烤漆房內壓力過高時,自動打開戶主門,確保操作人員的.

4, safety device: to ensure the pressure within the baking room is too high, automatic opening the main door, ensure the safety of operating personnel.

5、照明係統:一般采用新款設計,烤漆房噴漆操作時無陰影,特別采用的烤漆房專用的電子鎮流器,光照度高達800勒克司,同時在電源電壓低至180伏時仍能正常工作.

5, lighting system: general use of the new design, paint spraying operation without shadow, especially the use of professional paint room dedicated electronic ballast, light intensity up to 800 lux, while low power supply voltage to 180 volts can still work normally.

6、高級空氣過濾棉:兩道過濾層將空氣中的灰塵等雜物濾去,噴漆表麵無塵埃等雜物,並保持烤漆房內空氣清潔,對工作人員進和保護.

6, advanced air filter: two filter layer in the air of dust and debris to filter, paint the surface of dust and other debris, and keep the air clean paint room, staff and protection.

7、自動風門:噴漆時風門自動開成90度產生內循環,保溫時間長、省油、省電

7, automatic door: door automatic painting into 90 degree cycle, long holding time, fuel and electricity

8、燃燒器:能使能源的利用率大大提高,並且減少了對環境的汙染.

8, burner: can make the energy utilization rate is greatly improved, and reduce the pollution of the environment.

9、絕緣風機:噪音低、風量大,從而保證了漆的成型要求,又提高了油漆的利用率;同時,還能滿足空氣潔淨度的要求,確保工作人員的健康.

9, insulation fan: low noise, large air volume, so as to ensure the paint forming requirements, and improve the utilization rate of paint; at the same time, but also to meet the requirements of air cleanliness, ensure the health of the staff.

10、控製係統:一般選用的元件精心設計,對整機性能穩定可靠,操作簡便.數碼顯示,恒溫定時,保證在不同溫度情況下自動恒溫噴漆、烤漆.

10, control system: general selection of brand-name components of advanced design, stable and reliable performance of the machine is easy to operate. Digital display, constant temperature time at different temperatures, ensure automatic constant temperature spray paint, paint.

以上就是我們產品的相關介紹,本文來源汽車烤漆房,更多精彩內容請點擊:

Above is the relevant introduction of our products, the car paint room, more exciting content, please click 

關鍵詞: 烤漆房的基本配置結構原理           

掃一掃訪問移動端